Legrand UPS KEOR LINE RT 1500VA, line-interactiv, 1500VA / 1350W, USB / RS232, display, Rack / Tower

Keor Line RT 1000-1500-2200-3000 (310045 - 310046 - 310047 - 310048)

General features
- Single-phase UPS reversible rack/tower
- Power from 1000 to 3000 VA
- Perfectly sinusoidal output waveform
- VI line-interactive
- Boost and Buck AVR converter
- Control via microprocessor
- The battery is easy to replace
- RS232 communication port
- LAN / SNMP connectivity
- LCD display

Functions
- Adjustable output voltage
- Built-in self-test function
- Advanced management of battery discharge
- Protection from voltage peaks and noise filter
- Protection from overload and short-circuits
- Internet Modem / LAN protection
- Option of DC start-up
- USB-compatible

The Legrand UPS Keor Line RT model is an uninterruptible power source with interactive line technology and sinusoidal output. The Keor Line RT is an convertible UPS that can be used in both tower and rack configurations.

It delivers a rated power of 1000, 1500, 2200, 3000VA is managed by a microprocessor, is equipped with integrated self-diagnostics and works on cold-start.

Keor Line RT is equipped, internally, with valve-regulated, hermetically sealed lead accumulator batteries. The batteries can be easily replaced thanks to a specific door located on the front of the UPS. The presence of an electronic stabiliser (AVR) inside the UPS provides the connected loads with effective protection against any interference in the electrical mains. Thanks to the RJ11/ RJ45 sockets, it offers an excellent telephone/fax/modem/LAN protection.

Keor Line RT can be connected to a PC through the USB and Serial RS232 port allowing you to monitor its operation, thanks to the free software, and carry out an emergency shutdown of Windows and Linux operating systems.

Through the 3-button control panel, the LCD screen and 3 status LEDs, it can display the following alarms and operating modes:
• battery charge percentage
• normal operation
• battery-powered operation
• overloaded
• generic anomaly
• back-up time
• end of uptime

The Keor Line RT Static Uninterruptible Power Supply bears the CE marking, pursuant to Directives 73/23, 93/68, 89/336, 92/31, 93/68, and is designed and built in compliance with the following standards:
• EN 62040-1 “General and safety requirements for UPSs used in areas that are accessible to the operator”
• EN 62040-2 “Electromagnetic Compatibility requirements (EMC)”

General Features
Nominal power (VA) / Active power (W)
- 1000/900
- 1500/1350
- 2200/1980
- 3000/2700
Technology: Line-interactive VI
Waveform: Sinusoidal

Input
Input voltage: 230 V ± 10%
Input frequency: 45-65 Hz
Input Voltage Range: 165V-300V

Output
Output voltage: 230V ± 10%
Output frequency (nominal): 50/60 Hz +/-0,5% autosensing
THD Output voltage:‹ 3% with linear load

Batteries
Number, Type, Voltage of batteries
- 1000VA - 3 x 12V, 7Ah
- 1500VA - 3 x 12V, 9Ah
- 2200VA - 6 x 12V, 7Ah
- 3000VA - 6 x 12V, 9Ah
Backup time*
- 1000VA - 10 min
- 1500VA - 8 min
- 2200VA - 8 min
- 3000VA - 8 min
* The stated back-up times in minutes are estimated and may vary according to the load characteristics, operating conditions and environment.

Communication and Management
Display and Signals: Three buttons, display and three LEDs for real-time control of the status of the UPS
Protection for the telephone: RJ11/RJ45
Communication ports: USB-RS232
Remote Management: SNMP Slot

Measurements H x L x D (mm)
- 1000VA - 440x405x88
- 1500VA - 440x405x88
- 2200VA - 440x650x88
- 3000VA - 440x650x88
Net Weight (kg)
- 1000VA - 19
- 1500VA - 20
- 2200VA - 34
- 3000VA - 37

Environmental Conditions
Operating temperature (°C): 0 ÷ 40°C
Relative humidity (%): 0÷95 % non-condensing
Noise level at 1 m (dBA): < 40

Certifications
Standards: EN62040-1, EN62040-2