Fortron FSP 1000-50AAG, zdroj 1000W, 80PLUS GOLD, bulk

Fortron FSP 1000-50AAG

FSP1000-50AAG is an industrial level of switching power supply. The power supply comes to offer the total power capacity up to 1000 Watts, and uses unique active PFC (Power Factor Correction) circuit design with its high-load electrical components, makes it to be perfectly used in an industrial environment. In addition, with its full range of input and output electrical features, the power supply is ideally the best choice for server, workstation, communication or any other automation applications to use. The product also complies with the latest safety and EMC standards, which is perfectly to meet various regulations worldwide.

80 Plus Gold
Low Ripple & Noise
Output over voltage protection
Short circuit protection on all outputs
Resettable power shut down
100% burn-in under high ambient temperature(50°C)
Vacuum-impregnated transformer
MTBF:100K hours at 25°C
100% Hi-pot tested Line input fuse protection

1 x ATX 20+4
2 x 4+4 PIN
4 x PCI-E 6+2
12 x SATA
16 x Molex
2 x Floppy

Wattage 1000W
Dimension 190mm (L) × 150 mm (W) × 86mm (H)
Product Highlight Efficiency Level 80 Plus Gold
Altitude 5000M
General Specification Effciency 90% 230VAC
Voltage Regulation +3.3V, +12V, +5V, +5SB: ±5%
-12V: ±10%
Input Electrical Specification Input Frequency 47 ~ 63 Hz
Input Current 115V@ 14.0 Amps-rms maximum
230V@ 7.0 Amps-rms maximum
Output Specification Hold-up time 115V/60Hz 17mSec. Minimum@100% Load,
230V/50Hz 17mSec. Minimum@100% Load
Ouput Voltage Regulation +3.3Vdc output : +3.76 Vdc minimum, + 4.8Vdc maximum
+5Vdc output : +5.75 Vdc minimum, + 7.0Vdc maximum
+12Vdc output : +13.5 Vdc minimum, + 15.5Vdc maximum
Ripple & Noise 115V-rms/230V-rms 5V 20ms Maximum
115V-rms/230V-rms 12V 20ms Maximum
Over current protection 3.3V:50mV p-p
5V:50mV p-p
12V1:120mV p-p
-12V:120mV p-p
5Vsb:50mV p-p
Environmental Requirement Temperature Range Operating : 0 to +50?
Storage :-20 to +80?
Humidity Operating : 10-90% to % RH, Non-condensing
Storage : 95% to % RH, Non-condensing
MBTF The power supply have a minimum predicted MTBF(MIL-HDBK-217) of 100,000 hours of continuous operation at 25?, maximum-output load, and nominal AC inout voltage