Cisco Aironet 1815i Series

Cisco Aironet 1815i Series

Specification
Authentication and security
Advanced Encryption Standard (AES) for Wi-Fi Protected Access 2 (WPA2)
802.1X, RADIUS authentication, authorization, and accounting (AAA)
802.11r
802.11i
Software
Cisco Unified Wireless Network Software with AireOS Wireless Controllers Release 8.3 MR1 or later
Cisco Mobility Express (future availability)
Maximum clients
Maximum number of associated wireless clients: 200 per Wi-Fi radio, in total 400 clients per access point
802.11ac
2x2 single-user/multiuser MIMO with two spatial streams
Maximal ratio combining (MRC)
20-, 40- and 80-MHz channels
PHY data rates up to 866.7 Mbps (80 MHz on 5 GHz)
Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Rx)
802.11 Dynamic Frequency Selection (DFS)
Cyclic shift diversity (CSD) support
Ethernet ports
Authentication with 802.1X or MAC filtered
Dynamic VLAN or per port
Traffic locally switched or tunneled back to wireless LAN controller
Bluetooth (future availability)
Integrated Bluetooth 4.1 (including BLE) radio
Maximum transmit power: 4 dBm
Antenna gain: 2 dBi
Integrated antennas
2.4 GHz, gain 2 dBi
5 GHz, gain 4 dBi
Interfaces
1 x 10/100/1000BASE-T autosensing (RJ-45), Power over Ethernet (PoE)
Management console port (RJ-45)
Indicators
Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors
Dimensions (W x L x H)
Access point (without mounting bracket): 6 x 6 x 1.3 in (150.8 x 150.8 x 33 mm)
Weight
Access point without mounting bracket or any other accessories: 14 oz (400 g)
Environmental
Operating
Temperature: 32° to 104°F (0° to 40°C)
Humidity: 10% to 90% (noncondensing)
Max. altitude: 9843 ft (3000 m) @ 40°C
Nonoperating (storage and transportation)
Temperature: -22° to 158°F (-30° to 70°C)
Humidity: 10% to 90% (noncondensing)
Max. altitude: 15,000 ft (4500 m) @ 25°C
System
1 GB DRAM
256 MB flash
710 MHz quad core
Input power requirements
Power injector: AIR-PWRINJ5= or AIR-PWRINJ6=
Powering options
802.3af/at Ethernet switch
Optional Cisco power injectors (AIR-PWRINJ5=, AIR-PWRINJ6=)
Power draw
8.3W (maximum, on PoE)
Physical security
Torx security screw, included with the access point
Mounting
Included with the access point: mounting bracket AIR-AP-BRACKET8
Accessories
Mounting bracket: AIR-AP-BRACKET8= (available as spare)
Physical security kit: AIR-SEC-50= (sold separately), with 50 pcs. Security screws used to secure access point onto wall-mounting bracket, 50 pcs. RJ-45 caps and 2 pcs. unlock keys used to block physical access to Ethernet ports
Warranty
Limited Lifetime Hardware Warranty