GIGABYTE B760 A MASTER DDR4

GIGABYTE B760 A MASTER DDR4

Technické parametre:

CPU

LGA1700 socket: Support for the 13th and 12th Generation Intel® Core™, Pentium® Gold and Celeron® Processors*
        L3 cache varies with CPU
    * Please refer to "CPU Support List" for more information.

Chipset

        Intel® B760 Express Chipset

Memory

        Support for DDR4 5333(O.C.) / 5133(O.C.) / 5000(O.C.) / 4933(O.C.) / 4800(O.C.) / 4700(O.C.) / 4600(O.C.) / 4500(O.C.) / 4400(O.C.) / 4300(O.C.) / 4266(O.C.) / 4133(O.C.) / 4000(O.C.) / 3866(O.C.) / 3800(O.C.) / 3733(O.C.) / 3666(O.C.) / 3600(O.C.) / 3466(O.C.) / 3400(O.C.) / 3333(O.C.) / 3300(O.C.) / 3200 / 3000 / 2933 / 2666 / 2400 / 2133 MT/s memory modules
        4 x DDR4 DIMM sockets supporting up to 128 GB (32 GB single DIMM capacity) of system memory
        Dual channel memory architecture
        Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode)
        Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules
        Support for Extreme Memory Profile (XMP) memory modules
    (Please refer "Memory Support List" for more information.)

Onboard Graphics

Integrated Graphics Processor-Intel® HD Graphics support:
        1 x HDMI port, supporting a maximum resolution of 4096x2160@60 Hz * Support for HDMI 2.0 version and HDCP 2.3.
        1 x DisplayPort, supporting a maximum resolution of 4096x2304@60 Hz
        * Support for DisplayPort 1.2 version and HDCP 2.3
    (Graphics specifications may vary depending on CPU support.)

Audio

        Realtek® ALC1220-VB CODEC
        * The back panel line out jack supports DSD audio.
        High Definition Audio
        2/4/5.1/7.1-channel
        Support for S/PDIF Out

LAN

        Intel® 2.5GbE LAN chip (2.5 Gbps/1 Gbps/100 Mbps)
    Wireless Communication module
    Intel® Wi-Fi 6E AX211
        WIFI a, b, g, n, ac, ax, supporting 2.4/5/6 GHz carrier frequency bands
        BLUETOOTH 5.3
        Support for 11ax 160MHz wireless standard and up to 2.4 Gbps data rate
    (Actual data rate may vary depending on environment and equipment.)

Expansion Slots

    CPU:
        1 x PCI Express x16 slot, supporting PCIe 4.0 and running at x16 (PCIEX16)
        * For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot.
    Chipset:
        1 x PCI Express x16 slot, supporting PCIe 3.0 and running at x4 (PCIEX4)
        1 x PCI Express x16 slot, supporting PCIe 3.0 and running at x1 (PCIEX1)
    Storage Interface
    CPU:
        1 x M.2 connector (Socket 3, M key, type 22110/2280 PCIe 4.0 x4/x2 SSD support) (M2A_CPU)
    Chipset:
        2 x M.2 connectors (Socket 3, M key, type 22110/2280 PCIe 4.0 x4/x2 SSD support) (M2P_SB, M2M_SB)
        4 x SATA 6Gb/s connectors
    RAID 0, RAID 1, RAID 5, and RAID 10 support for SATA storage devices
    USB
    Chipset:
        1 x USB Type-C® port on the back panel, with USB 3.2 Gen 2x2 support
        1 x USB Type-C® port with USB 3.2 Gen 2 support, available through the internal USB header
        1 x USB 3.2 Gen 2 Type-A port (red) on the back panel
        4 x USB 2.0/1.1 ports available through the internal USB headers
    Chipset+2 USB 3.2 Gen 1 Hubs:
        6 x USB 3.2 Gen 1 ports (4 ports on the back panel, 2 ports available through the internal USB header)
    Chipset+USB 2.0 Hub:
        4 x USB 2.0/1.1 ports on the back panel

Internal I/O Connectors

        1 x 24-pin ATX main power connector
        1 x 8-pin ATX 12V power connector
        1 x 4-pin ATX 12V power connector
        1 x CPU fan header
        1 x CPU fan/water cooling pump header
        4 x system fan headers
        2 x system fan/water cooling pump headers
        2 x addressable LED strip headers
        2 x RGB LED strip headers
        3 x M.2 Socket 3 connectors
        4 x SATA 6Gb/s connectors
        1 x front panel header
        1 x front panel audio header
        1 x USB Type-C® header, with USB 3.2 Gen 2 support
        1 x USB 3.2 Gen 1 header
        2 x USB 2.0/1.1 headers
        1 x noise detection header
        2 x Thunderbolt™ add-in card connectors
        1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0 module only)
        1 x reset button
        1 x Q-Flash Plus button
        1 x reset jumper
        1 x Clear CMOS jumper
        2 x temperature sensor headers

Back Panel Connectors

        1 x USB Type-C® port, with USB 3.2 Gen 2x2 support
        1 x USB 3.2 Gen 2 Type-A port (red)
        4 x USB 3.2 Gen 1 ports
        4 x USB 2.0/1.1 ports
        2 x SMA antenna connectors (2T2R)
        1 x DisplayPort
        1 x HDMI port
        1 x RJ-45 port
        1 x optical S/PDIF Out connector
        5 x audio jacks

I/O Controller

        iTE® I/O Controller Chip
H/W Monitoring
        Voltage detection
        Temperature detection
        Fan speed detection
        Water cooling flow rate detection
        Fan fail warning
        Fan speed control
        * Whether the fan (pump) speed control function is supported will depend on the fan (pump) you install.
        Noise detection

BIOS

        1 x 256 Mbit flash
        Use of licensed AMI UEFI BIOS
        PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0

Unique Features

        Support for GIGABYTE Control Center (GCC)
        * Available applications in GCC may vary by motherboard model. Supported functions of each application may also vary depending on motherboard specifications.
        Support for Q-Flash
        Support for Q-Flash Plus

Bundled Software

        Norton® Internet Security (OEM version)
        LAN bandwidth management software

Operating System

        Support for Windows 11 64-bit
        Support for Windows 10 64-bit

Form Factor

        ATX Form Factor; 30.5cm x 24.4cm