ARCTIC Freezer i32 Plus – CPU Cooler for Intel Socket 2011(-v3) / 1156 / 1155 / 1150 / 1151, direct touch technology

ARCTIC Freezer i32 Plus – CPU Cooler for Intel Socket 2011(-v3) / 1156 / 1155 / 1150 / 1151

Skvělý semipasivní chladič od ARCTICu. V méně náročných aplikacích běží zcela pasivně a ventilátory se zapínají jen když je třeba. To prodlužuje jejich životnost a umožnuje při správném systému většinu času běžet v pasívním zcela tichém režimu.

Freezer i32 Plus
Semi Passive Intel CPU Tower Cooler with Push-Pull-Configuration

Additional Fan for More Cooling Capacity
Two low noise F12 PWM fans mounted on opposite sides of the radiator provide a great airflow.
The first fan pushes air through the radiator, the second fan pull the air through it.

Performance Champ
The Freezer i32 is based on the ARCTIC Freezer i30, but features several improvements that boost performance and further reduce noise. Thanks to the award winning cooling performance of 320 Watts, the Freezer i32 is the perfect gadget for PC enthusiasts looking for a keen solution for the CPU cooling.

Semi Passive Cooling
By semi passive performance the Freezer i32 Plus provides again a special feature. A sophisticated fan controller that was developed by German engineers enables the CPU to be cooled completely passively during typical Windows operation. The F12 PWM fans only start up at a higher load (starting at 40 % PWM).

Improved Heat Dissipation
As a new feature, the Freezer i32 Plus has off-centered heat pipes that dispense the heat better than the centered ones of its predecessors. Also, the layout of the 49 aluminium fins creates micro vortices that boost the airflow and circulate it around the heatpipes.

Optimal Compatibility
Fast and easy to install and extremely reliable, the mounting system is compatible with all current Intel sockets. Also, the low footprint of the Freezer i32 Plus avoids interference with the RAM, even if there are two fans used ensuring the best compatibility.

Enhanced Bearing
Due to a new alloy/lubricant combination developed in Germany, the friction within the bearing is reduced and a greater efficiency is achieved. This way, there is less heat development as well as less bearing noise and you can enjoy a longer service life of your cooler.

Easy Installation & Transport Safe
Thanks to the screw-mount onto a back-plate and a significantly lower weight compared to the i30, the Freezer i32 Plus is not only fool-proof to install, but also absolutely transport safe.

Compatibility
Intel Socket:
1150, 1151, 1155, 1156, 2011*, 2011-3*
*SQUARE ILM (80 x 80 mm spacing) only
Max. Cooling Capacity: 320 Watts
Recommended for TDP up to: 150 Watts

Fan Speed: 0 - 1,350 RPM (Controlled by PWM)
Noise Level: 0.3 Sone
Current / Voltage: 0.20 A / +12V DC