148865
Moje konto
ZyXEL WiFi 300Mbps AP 5in1 5dBi ant. WAP3205 v2

WAP3205 v2, Wi-Fi 802.11n, 300Mbps, Access point 5-in-1 (A/P, Bridge, Repeater, WDS, Client) with detachable antennasZobraziť viac
Produkt je vyradený !
V našej ponuke nájdete podobné modely. S výberom pomôžeme.
Kód tovaru
PN kód
WAP3205V2-EU0101F
Výrobca
Záruka
36 mesiacov
Alternatívy v kategórií Access point WiFi 4 - 802.11n
Parametre
Sieťové produkty |
|
---|---|
Výrobca SIE |
Zyxel |
WiFi štandard |
802.11n |
Frekvencia WiFi |
2,4 GHz |
Rýchlosť 2,4 GHz |
300 Mb/s |
Počet LAN portov |
2 |
Rýchlosť LAN |
100 Mbit/s |
OPÝTAJTE SA PORADCU

Následník produktu2
slide 1 to 2 of 2
Zaradenie produktu
Popis produktu
ZyXEL WiFi 300Mbps AP 5in1 5dBi ant. WAP3205 v2
ZyXEL WiFi 300Mbps AP 5in1 5dBi ant. WAP3205 v2WAP3205, Wi-Fi 802.11n, 300Mbps, Access point 5-in-1 (A/P, Bridge, Repeater, WDS, Client) with 5dBi detachable antennas, WPS button, Wireless on/off button, LED light on/off button 802.11n compliant with data transfer rates of up to 300 Mbps*
Two 5 dBi antennas enhance wireless signals for stable data transmission
Four operating modes to satisfy different needs for wireless coverage extension
AP/Universal Repeater/Client mode switch simplifies operating mode setup
One-touch WPS button for wireless security setup
Two Ethernet ports for connecting wired devices to wireless networks
Effortless wireless access control with wireless on/off button
Environment-friendly LED light on/off button
Easily Enhance Wireless Coverage for Your Needs
Complying with the 802.11n standard, the ZyXEL WAP3205 v2 Wireless N300 Access Point can enhance wireless speeds up to 300 Mbps* and extend the coverage. With the AP/Universal Repeater/Client mode switch, you can setup the operating modes of WAP3205 v2 according to your needs easily and instantly.
Sharing Internet Access Wirelessly
The 802.11n standard-compliant WAP3205 v2 brings you wireless speeds of up to 300 Mbps* for multimedia streaming. The all-in-one design allows WAP3205 v2 to perform as an AP, a WLAN client, a universal repeater or a Wireless Distribution System (WDS) according to your needs for wireless coverage extension and access sharing.
Simple Operation Modes Setup
You can easily set up the operating modes of WAP3205 v2 to meet your needs through the AP/Universal Repeater/Client mode switch without complicated configuration.
One-Touch WPS Button
The one-touch Wi-Fi Protected Setup (WPS) push button of WAP3205 v2 only takes a few seconds to setup a secured wireless network. * The maximum wireless data transfer rate is derived from IEEE Standard 802.11 specifications. Actual data transfer rate will vary from network environment including: distance, network traffic, building site materials/construction, interference from other wireless devices, and other adverse conditions.
Power on/off switch
Just push the wireless on/off button of WAP3205 v2, you can easily save energy when the device is not in use.
Wireless scheduling
Save unnecessary power consumption and reduce wireless radiation when wireless connection is not in use.
Wireless output management
WAP3205 v2 makes it easy for users to adjust the output power to reduce interference that affects your neighbors.
System Specifications
Wirless Standard •802.11 b/g/n
Wireless Transfer Rate
Receive: 300 Mbps*
Transmit: 300 Mbps*
Wireless Security •64/128 bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK
WLAN Features
4-in-1 operation modes, including access point, WLAN client, universal repeater, and WDS
Wi-Fi Protected Setup (WPS)
Wi-Fi Multimedia (WMM)
Wireless scheduling
Wireless output power management
Auto channel selection
MAC address filtering
System Management
HTTP
Diagnostic logs
Online firmware upgrade
Hardware Specifications
LAN: Two 10/100 Mbps Ethernet RJ-45 ports with auto MDI/MDIX support
LED indicator: ?Power
LAN (1 - 2) ?Wireless ?WPS
Antenna: Two 5 dBi detachable antennas
Switch: AP/Universal Repeater/Client mode switch for setting up operation mode
Button/Switch: ?Wireless on/off button
LED light on/off button ?WPS button ?Reset button
Power rating: 12 V DC, 1 A
Power consumption: 8 watt max.
Physical Specifications
Item dimensions (W x D x H): 159 x 111 x 23 mm (6.26” x 4.37” x 0.91”)
Item weight: 255 g (0.56 lb.)
Packing dimensions (W x D x H): 247 x 61 x 155 mm (9.72” x 2.4” x 6.1”)
Packing weight: 650 g (1.44 lb.)
Environmental Specifications •Operating Environment ?Temperature: 0°C to 40°C (32°F to 104°F) ?Humidity: 10% to 90% (Non-condensing) •Storage Environment ?Temperature: -30°C to 70°C (-22°F to 158°F) ?
Humidity: 10% to 95% (Non-condensing)
Certification
Safety: CE LVD
EMC: CE, FCC
Package Contents
Wireless Access Point
Two detachable antennas
Power adapter
Ethernet cable
Quick start guide
Support CD
Warranty card
http://www.zyxel.com/web/product_overview.php